Spare parts direct store - http://spare-parts-direct.com

Ford 460 engine - Engine




   Ford 460 engine - 1'034 items found  View more items

Ford 460 engine - Bookshelf


192 pages

Popular Science

1984-05

Duel of the mini motor homes: Chevy vs. Ford Ford's mini-motor-home chassis — essentially a full-size van that's cut away behind the driver's seat — comes with a 460-cu.-in. V8; GM's Chevy-GMC chassis comes with a 350-cu.-in.

About this book
Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.



144 pages

How To Build Ford Restomod Street Machines, Classic Looks With Modern Performance

Creator: Tony E. Huntimer | 2005-10-29

housing surface with 385 Series 429 and 460 big-blocks, but its engine mounts are not shared by any other Ford engine. For more general info on smallblock Ford engines, check out any one of the small-block Ford titles from CarTech Books ...

Publisher: S-A Design

About this book
How to Build Ford Restomod Street Machines shows you how to modify your vintage Ford to accelerate, stop, corner, and ride as good as - if not better than - Detroit's best new high-performance cars. Don't subject your classic Ford to a life of garage time, trailer rides, outdated factory-original performance, and the occasional Sunday cruise - build it to run hard. Author Tony Huntimer uses over 300 photos to show you how to upgrade your engine, drivetrain, chassis, suspension, body, and interior to make your ride a stand-out performer using factory and aftermarket parts. He even covers many Ford-specific upgrades, including the Granada brake swap and the popular Shelby Mod.



160 pages

Rebuild Ford V-8 Hp36

Creator: Tom Monroe | Transportation - 1980-07-01

It was cast at one of two Ford foundries, the Cleveland Foundry or the Michigan Casting Center. Those cast at the Michigan ... 429/460-Although totally different engines, the 429/460 has the same bell- housing pattern as the 351 M/ 400 ...

Publisher: HP Books

About this book
If you have one of the 351C, 351M, 400, 429 or 460 Ford V8s, this comprehensive book is a must. It walks you through a complete engine rebuild, step-by-step, with minimum use of special tools. Save money by finding out if your engine really needs rebuilding, or just simple and inexpensive maintenance. Results from diagnosis outlined in this book should be your guide, not the odometer. All rebuilding steps are illustrated from beginning to end. How to inspect parts for damage and wear. How to recondition each part yourself or get the job done right! The most complete source of information identifying major engine parts. Casting numbers, parts description, when a part was used and how it can be interchanged is fully covered in the text, in 20 tables and in 560 photos or drawings. This book will make you the expert!


Engine Directory

Engine Build Archive - 460 Ford Forum
A place to archive DYNO or 1/4mile VERIFIED engine builds. Please post any engine tech questions to the Engine Tech forum.

ford 460 engine | eBay - Electronics, Cars, Fashion ...
Find great deals on eBay for ford 460 engine and ford 429 engine. Shop with confidence.

Ford 385 engine - Wikipedia, the free encyclopedia
The Ford 385 engine family (the name coming from the 3.85 inch crankshaft stroke of the 460 V8) was the Ford Motor Company's final big block V8 engine design ...

Ford 460 Motor Specs | eHow - eHow | How to - Discover the ...
Ford 460 Motor Specs. Ford produced its 460 engine, a member of the 385 engine family, from 1968 to 1997. Ford put this big-block V-8 engine in everything from ...

460 Engine For Sale | Ford 460 Engine - Dream Car Motors
Ford 460 Engine for sale here! Want to have a dream car? Buy your dream engine first! See all our offers on the Ford 460 Engines and make your dreams come true! Visit ...


ADVANCED PRODUCT FINDER

    Don't see what you're looking for?

Editor's picks

  • HP Trade

    How to Rebuild Ford V-8 Engines

    Book (HP Trade)

    Rating (23 reviews):
    (4.5/5)
    HP Trade

    One of the best how-to books written.

    0 5/5 Tom McDougal (california) - See all my reviews This review is from: How to Rebuild Ford V-8 Engines (Paperback) This is a great book for anyone wishing to rebuild any of the engines this book covers.I used it years ago when I built my first 460.It is easy to read and understand.I would also recommend "THE STEP BY STEP GUIDE TO ENGINE BLUEPRINTING" by Rick Voegelin. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , July 8, 1997

    Great Book!

    0 5/5 0, December 20, 2000

    Straight forward with a sense of humour; easy to understand

    0 5/5 0, November 10, 1999
    List Price: $25.00
    H-P Books HP36 Rebuild Ford V-8
    Dimension LxWxH : 10.8x8.3x.3


  • Top Street Performance

    TSP HEI DISTRIBUTOR - Ford 351C 351M 400- 460 Cleveland V8 Engines, Blue JM6506BL

    Automotive Parts and Accessories (Top Street Performance)

    Rating (2 reviews):
    (3.0/5)
    Top Street Performance

    Works great

    0 5/5 Frank Cordova - See all my reviews Verified Purchase(What's this?) This review is from: TSP HEI DISTRIBUTOR - Ford 351C 351M 400- 460 Cleveland V8 Engines, Blue JM6506BL Have had this in m 1965 f100 w/ a 351m for a lot of miles now and have had zero issues. made the truck run cleaner and better. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , February 17, 2014

    Please read or this could happen to you!

    0 1/5 Christopher bowen - See all my reviews Verified Purchase(What's this?) This review is from: TSP HEI DISTRIBUTOR - Ford 351C 351M 400- 460 Cleveland V8 Engines, Blue JM6506BL Product seems fine ( for being the wrong part ) but company policies really need some work!!!!! Policy won't allow for them to simply swap the parts out! Returns I will have to pay for shipping and a 20 present restocking fee! Buyer beware of what you might be getting into! Thank you for reading, One VERY Dissatisfied Customer 0 Help other customers find the most helpful reviews  Was this review helpful to you? , March 18, 2014
    Stock Replacement
    Faster Engine Starts
    Hotter Spark for more power and efficient fuel management
    E-Z One Wire Hookup
    Allows for a wider spark


  • HP Trade

    How To Rebuild BIG-BLOCK FORD ENGINES

    Book (HP Trade)
    List Price: $25.00


  • Great Neck Saw

    Great Neck OEM 27062 Ford 5/16-Inch Hex Oil Pump Primer

    Home Improvement (Great Neck Saw)
    List Price: $11.99

    Connects to the oil pump shaft through the distributor hole
    Designed for professional auto mechanics and heavy duty applications
    For use with 3/8-Inch reversible drill


  • RR

    1000lb Capacity Engine Cradle Dolly for Ford

    Automotive Parts and Accessories (RR)

    Rating (8 reviews):
    (2.5/5)
    RR

    10 lb capacity Engine Dolly

    0 1/5 Rich - See all my reviews Verified Purchase(What's this?) This review is from: 1000lb Capacity Engine Cradle Dolly for Ford Recieved the engine stand in good condition. While assembling.. my 15 year old son asked.. "How are these little bolts going to be strong enough to support the engine that is in our car?" I said -- I don't know? Maybe the cross brace just keeps the dolly parallel and all the weight is pushed downward...? Well... my son was right....our 650lb engine crushed the dolly. It actually didn't even fit our engine correctly. Tried it forward - backwards - sideways.. in no way did the bolt holes line up perfectly.This product is a waste of time and money. It is not 1000 lb capacity, it does not fit our Ford.. Maybe I can weld it up and use it as a little table with casters????? Not worth spending the money on it to even return it. A word to the wise... if you need an Engine Dolly.. DO NOT PURCHASE THIS ONE! 0 Help other customers find the most helpful reviews  Was this review helpful to you? , September 6, 2011

    Decent Engine Cradle!!

    So I purchased this engine cradle from this seller, knowing that I might have to modify it to fit my small block Ford. Item arrived in great condition, after inspecting the hardware, I deceided to put a more heavy duty set of bolts on the cross bar, because of reading from other customers that after they put the engine on the cradle it fails at that weak point. Having put heavier duty bolts on the cross bar I assembled the cradle. I went to put the engine and the mounts didn't line up. So my solution was to disassemble the cradle and hold the engine in the air on a hoist while I put the cradle on piece by piece left then right finally the cross bar, I still fought with it to fit but i didnt have to drill anything Its just a very tight fit. I would recommend this only if you're handy and don't mind upgrading the bolts and spending 30 min. wrestling with it to fit after that it held the weight of my entire engine without a problem oil pan to intake. A good buy for a price that can't... 4/5 Ricardo Sanchez - See all my reviews Verified Purchase(What's this?) This review is from: 1000lb Capacity Engine Cradle Dolly for Ford So I purchased this engine cradle from this seller, knowing that I might have to modify it to fit my small block Ford. Item arrived in great condition, after inspecting the hardware, I deceided to put a more heavy duty set of bolts on the cross bar, because of reading from other customers that after they put the engine on the cradle it fails at that weak point. Having put heavier duty bolts on the cross bar I assembled the cradle. I went to put the engine and the mounts didn't line up. So my solution was to disassemble the cradle and hold the engine in the air on a hoist while I put the cradle on piece by piece left then right finally the cross bar, I still fought with it to fit but i didnt have to drill anything Its just a very tight fit. I would recommend this only if you're handy and don't mind upgrading the bolts and spending 30 min. wrestling with it to fit after that it held the weight of my entire engine without a problem oil pan to intake. A good buy for a price that can't... Read more Help other customers find the most helpful reviews  Was this review helpful to you? , November 22, 2011

    FAIL

    0 1/5 C.D. Walker (Kirkwood, MO United States) - See all my reviews Verified Purchase(What's this?) This review is from: 1000lb Capacity Engine Cradle Dolly for Ford Disappointment. Bolt holes did not line up for our Ford motor. This is necessary for the cradle/dolly to stay together. So instead it just collapses & breaks. I'm going to have to find a better one. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , August 27, 2011
    List Price: $69.99
    Price: $30.24
    You Save: $39.75 (57%)
    High-quality powder coating finish resistant to chipping, scratching, UV damage, and corrosion
    Maneuver the cradle/dolly easily through its four 3" swivel casters
    Heavy Duty Steel Construction for Added Strength
    Strong and durable with its heavy duty steel construction


  • Unique Replicas

    1949 Ford W/460 Engine Blower Black/Flame 1/24 Diecast

    Toy (Unique Replicas)


  • HP Trade

    How to Build Small-Block Ford Racing Engines HP1536: Parts, Blueprinting, Modifications, and Dyno Testing for Drag, Circle Track,Road, Off-Road, and ... Fords, 302/5.0L, and351W/5.8L, Up to 460 CID.

    Book (HP Trade)
    List Price: $21.95


  • RelicPaper

    1969 Lincoln Continental: 460 Cubic Inch V-8 Engine, Ford Print Ad

    Home (RelicPaper)

    Advertiser: Ford
    This is an original print ad from 1969.
    A print ad is a collectible piece of advertising. You are not purchasing diamonds, automobiles, trains, cameras or whatever is pictured within the print itself.
    Ad Size: 6.75" x 10.0"


  • FORGEMAX

    2 Oil Pump Primer Tools 1/4", 5/16" Hex FORD Engine 289 302 390 428 351 429 460

    Automotive Parts and Accessories (FORGEMAX)

    For use with any hand drill. Black Oxide finish
    It works by connecting to the oil pump shaft through the distributor hole and inserting in oil pump.
    Triangle Shaped Drive End to eliminate drill chick slippage
    Prime lubricating system of rebuilt engine prior to first start to prevent damage of dry start
    Aluminum bushing to insert in manifold for centering of tool


  • PROFormance Powertrain

    PROFessional Powertrain DFK2 Ford 460 Engine, Remanufactured

    Automotive Parts and Accessories (PROFormance Powertrain)
    List Price: $3,161.00
    Price: $2,509.00
    You Save: $652.00 (21%)


Engine


Gift Ideas

75 Gran Torino Tee Shirt

gran, torino, mopar, hot, rod, 1970, ford
Gran Torino Details Year: 1975-76 Make & Model: Ford Gran Torino Engine: 351 c.i. Cleveland V-8 rated at 250 hp (400 c.i. and 460 c.i. V8s were optional and also used) Carburetor: Four barrel carb Transmission: XPL type C-6 Automatic Transmission Wheels: Magnum 500 with HR78 x 14/B Radial Firestone Tires Color: Bright Red (2B) Other Notables: Black vinyl interior with white trim, color-keyed sport mirrors, AM-FM radio with 8-Track, heavy duty suspension, air shocks on the rear end, special stripe, sport steering wheel, bumper protection and manual air conditioning.
Price: $$21.95

Ford 460 American Horsepower Premium Jewelry Box

ford, 460, engine, motor, mustang, f150, muscle
Many people think all hot rods run a Chevy motor but maybe they dont know there are great Ford options like the 460. It doesnt matter if you drive a truck, mustang or falcon the 460 is a great engine and it will give you horsepower to spare
Price: $$27.95

american muscle 460 ford card

460,, ford,, motor,, engine,, classic,, vintage,,
bring out the big boy the ford 460. its the powerplant you should choose if you want some serious horsepower and you want power by ford
Price: $$3.30

american muscle 460 ford cover for the iPad mini

460,, ford,, motor,, engine,, classic,, vintage,,
bring out the big boy the ford 460. its the powerplant you should choose if you want some serious horsepower and you want power by ford
Price: $$44.95

Certificates