Spare parts direct store - http://spare-parts-direct.com

Centrifugal clutch - Clutch




   Centrifugal clutch - 5'346 items found  View more items

Centrifugal clutch - Bookshelf


509 pages

Automobile Engineering

Creator: Ttti | Automobiles - 2002

Multiplate Clutch Multiplate clutches are used for large trucks and racing cars where high torque transmission is ... Centrifugal Clutch The centrifugal clutch automatically disengages itself when the speed falls below and engages when the ...

Publisher: Tata McGraw-Hill Education



934 pages

Design of Machine Elements

Creator: V. B. Bhandari | Machine design - 2010

Since the number of shoes is z, the torque transmitting capacity of the clutch is given by pmr rdz{co\ - co\) M= — : (11.23) ' 1000 v } There are two distinct applications of centrifugal clutch, namely, light-duty applications and heavy- duty  ...

Publisher: Tata McGraw-Hill Education



910 pages

Analysis and Design of Machine Elements

Creator: Vijay Kumar Jadon, Suresh Verma | Machine design - 2010-02-01

The shoes of a centrifugal clutch are spring loaded as shown in Figure 19.11. This prevents engagement until 75% of full speed has been attained. The centrifugal clutch is automatic in operation and the torque increases with square of the ...

Publisher: I. K. International Pvt Ltd

About this book
The book covers fundamental concepts, description, terminology, force analysis and methods of analysis and design. The emphasis in treating the machine elements is on methods and procedures that give the student competence in applying these to mechanical components in general. The book offers the students to learn to use the best available scientific understanding together with empirical information, good judgement, and often a degree of ingenuity, in order to produce the best product. Few unique articles e.g., chain failure modes, lubrication of chain drive, timing belt pulleys, rope lay selection, wire rope manufacturing methods, effect of sheave size etc., are included. Friction materials are discussed in detail for both wet and dry running with the relevant charts used in industry. Design of journal bearing is dealt exhaustively. Salient Features: " Compatible with the Machine Design Data Book (same author and publisher). " Thorough treatment of the requisite engineering mechanics topics. " Balance between analysis and design. " Emphasis on the materials, properties and analysis of the machine element. " Material, factor of safety and manufacturing method are given for each machine element. " Design steps are given for all important machine elements. " The example design problems and solution techniques are spelled out in detail. " Objective type, short answer and review problems are given at the end of each chapter. " All the illustrations are done with the help of suitable diagrams. " As per Indian Standards.


Clutch Directory

Centrifugal Clutch Line: NORAM Centrifugal Clutches
NORAM’s centrifugal clutches are considered the highest quality in the market. NORAM’s a leader in centrifugal clutches for industrial clutch applications.

Animation How centrifugal clutch works. - YouTube
Our Web site: www.howmachineworks.com Hi Guys, this is a video animation explaining about the working of a centrifugal clutch. Each of its components like ...

Centrifugal Clutch 1800 Series: NORAM Centrifugal Clutches
NORAM’s 1800 Series centrifugal clutches were designed for construction equipment, farm machinery, go karts and other centrifugal clutch applications.

Centrifugal Clutch - GroGro
Centrifugal clutch double pulley 4". Item Code: CCDPS4"1"18BH Features. Roller Bearing, Double Sealed; Self-Contained; Bi-Directional; Heavy Duty Design

ADA 54mm Centrifugal Go-Ped Scooter Clutch Kit
54mm centrifugal clutch kit for Zenoah and Chung Yang engines. Bolts between the engine and the frame, so it mounts to frames that have the same bolt pattern as the ...


ADVANCED PRODUCT FINDER

    Don't see what you're looking for?

Editor's picks

  • CENTRIFUGAL CLUTCH 3/4" BORE #35 CHAIN 12T FOR GO KART MINI BIKE ENGINE 3/4 BAR

    Lawn & Patio
    List Price: $22.00
    Price: $15.64
    You Save: $6.36 (29%)

    35# Chain
    12 Tooth
    High Quality Clutch
    3/4" Bore


  • Parts Camp

    Parts Camp Centrifugal Clutch 3/4" Bore #40/41/420 Size Chain 10 Tooth For Go Kart and Mini Bike

    Lawn & Patio (Parts Camp)
    List Price: $21.99

    Bi-directional operation, Easy to install
    Commonly used on Go Karts, Mini Bikes, Garden Equipment, Log Splitters, Pumps, Riding Mowers, Snow Throwers and Garden Tractors
    Fits 2 - 6.5HP engines HONDA GC160, GC190, GX120, GX140, GX160, GX200
    Fits Engine 2 - 6.5HP with 3/4" Shaft and 3/16" Key way
    For Single Wheel Drive Karts with Tires no larger than 15" Tall


  • Jeremywell

    Centrifugal Clutch 3/4" Bore 10 Tooth For 40,41,420 Chain, Up to 7HP Engines

    Automotive Parts and Accessories (Jeremywell)
    List Price: $28.57

    Two Set Screws are NOT included!
    Works also with:2 - 6.5hp Honda & Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs & Stratton and 2-6.5 HP With 3/4" Shaft Tecumseh Engines 2-6.5 HP With 3/4" Shaft
    Specifications:outside diameter 4 3/4". total width 3". clutch back to sprocket is 2 1/2". Works with 15 inch tires
    Centrifugal Clutch 3/4" Bore 10 Tooth For 40,41,420 Chain, Up to 7HP Engines. Common clutch for 3.5-7hp engines 2200 RPM
    Perfect For Go Kart Minibike Baja Mini Bike MB165 & MB200


  • LotFancy

    LotFancy Go Kart Minibike Centrifugal Clutch for Go-Karts, Riding Mowers, Snow Throwers (3/4" Bore 10T)

    Automotive Parts and Accessories (LotFancy)
    List Price: $59.99

    Our clutch assembly with 3/4" shaft for 163cc 5.5 Hp & 196cc 6.5 Hp Engines
    Common clutch for 3.5-7hp engines using #40/41/420 chain,mounts onto crankshaft using bolt and washer on the end of the crankshaft
    Centrifugal Clutch 10 tooth, 3/4" bore, use #40/41/420 chain with 3/16 key built in
    Set screws and chain NOT included
    Compatible with Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior)


  • Jeremywell

    Centrifugal Clutch 3/4" Bore 12 Tooth For 35 Chain, Up to 6.5 HP, 2300 RPM

    Automotive Parts and Accessories (Jeremywell)
    List Price: $32.60

    Two Set Screws are included in the bag, please open the bag with caution, it may drop out.
    Engagement Speed (RPM): 2,300 Perfect for Go Kart, Minibike, Fun Kart.
    Dimensions: #35 Chain, Pitch:3/8", Roller Diameter: .200",Roller Width: 3/16",Works with 15 inch tires
    FITS:Honda GX160 Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc Nearly all 5.5 HP clones Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands.
    Jeremywell Brand Centrifugal Clutch 3/4" Bore 12 Tooth Heavy Duty Perfect for 35 Roller Chain- Up to 6.5HP Horsepower


  • Rotary

    MaxPower 455 Max Torque Clutch 35C 12T

    Lawn & Patio (Rotary)
    List Price: $35.26

    35 Chain each
    3/4 Inch Bore
    12 Teeth Clutch


  • GoPowerSports

    GoPowerSports Go Kart Mini Bike 10T Centrifugal Clutch 3/4, 41/420

    Automotive Parts and Accessories (GoPowerSports)
    List Price: $27.26

    Separate 3/16" key and two set screws
    3/4" bore designed for 2-7hp engines
    10T sprocket for 41/420 chain


  • Jinghan

    MegaFlint 10T Centrifugal Clutch 3/4, Chain #40 #41 #420 for Go-Karts,Mini Bike, Riding Mowers, Snow Throwers NEW

    Automotive Parts and Accessories (Jinghan)
    List Price: $39.99

    OEM replacement clutch assembly used on all versions of the Baja Mini Bike, including the Baja Heat, Mini Baja, and the Baja Warrior.
    Centrifugal Clutch 10 tooth, 3/4" bore, #40/41/420 chain with 3/16 key built in.
    This item is also a perfect replacement part on many small utility 163cc 5.5 Hp and 196cc 6.5 Hp engines.
    Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
    Common clutch for 3.5-7hp engines using #40/41/420 chain.


  • Parts Camp

    Parts Camp Centrifugal Clutch 3/4" Bore #35 Size Chain 12 Tooth For Go Kart and Mini Bike

    Lawn & Patio (Parts Camp)
    List Price: $23.99

    Fit 2 - 6.5 HP Engines Honda GC160, GC190, GX120, GX140, GX160, GX200
    Bi-directional operation, Easy to install
    Fit Briggs & Stratton and 2 - 6.5 HP With 3/4" Shaft
    Commonly used on Go Karts, Mini Bikes, Garden Equipment, Log Splitters, Pumps, Riding Mowers, Snow Throwers and Garden Tractors
    Fit Tecumseh Engines 2 - 6.5 HP With 3/4" Shaft And Any Other Engines With 3/4


  • Jeremywell

    Centrifugal Clutch 5/8" Bore 11 Tooth For 35 Chain For 2.8HP and 97cc Engines

    Automotive Parts and Accessories (Jeremywell)
    List Price: $25.73

    These are used on 2hp and some older 3hp engines.
    Fits ScooterX Sport Kart, Mini Bike, Mini Chopper, Lawnmower, Garden Equipment, Log Splitters, Pumps, Riding Mowers, Snow Throwers and Garden Tractors, and Mini Motorcycles
    Common small engines this will fit are:Briggs Tecumseh Honda Honda clone Kawaski Robin Suburu Kohler Clinton Harbor Freight private label engines Northern private label engines
    Two Set Screws are NOT included!
    eremywell Brand Centrifugal Clutch 5/8" Bore 11 Tooth Predator 2.8 HP 97cc Engine


Clutch