14 teeth clutch disc - Bookshelf
Direct Support and General Support Maintenance Manual for Truck, Lift, Fork, Gasoline Engine Driven, Solid Rubber Tires, 127 Inch Lift, 2000 Pound Capacity (Army Model MHE 229) (Clark Equipment Model 2329397), NSN 3930-00-315-9699
Retainer ring 4. Shaft spacer 5. Thrust washer 6. Inner seal 7. Retainer ring 8. Inner bearing 9. Bearing spacer 10. Gear and bushing 11. Drive shaft 12. Retainer ring 13. End plate 14. Internal tooth clutch disc 16. External tooth clutch disc 16.
Direct support and general support maintenance manual for crane, wheel mounted, 20-ton at 10-foot radius, 2 engines, diesel engine driven, 4x4 air transportable, Harnischfeger Corp. model M320RT (NSN 3810-00-275-1167).
(8) Install one inner disc spline teeth on inner diameter, on disc hub and against clutch piston (9). (9) Install one ... From the rear end of the clutch drum, press support bearing (16) into the clutch drum and secure with snap ring (14). (4) Install ...
If the lofty price of the dual-disc clutch does not appeal to you, you can get the 10.5" L-88/ZL-1 single-disc clutch. ... If you want to install a 168-tooth 14- inch- diameter flywheel, the required starter and bell housings are numbered 1969309 and ...