Spare parts direct store - http://spare-parts-direct.com

Aluminum welding rods propane





Aluminum welding rods propane - Bookshelf


184 pages

Popular Science

1980-03

Welding aluminum at last: a way to do it at home Make full-strength joints using only a propane torch and special rods By GORDON GROENE When the new metal called aluminum was introduced at the Paris Exhibition in 1855, it was labeled a ...

About this book
Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.


Welding engineer

Creator: American Welding Society | Technology & Engineering - 1967

PRIME WIRE — Aluminum welding wire. All-State Welding Alloys Co., Inc. PRO-CLAMP — Positioning and aligning clamps. Bernard Welding Equipment Co. PRODUCTER — Positioner. Bentley Weld- ery, Inc. PRODUCTION-ROD — E60II electrode.



579 pages

Welding and Brazing of Carbon Steels: Arc welding I

Technology & Engineering - 1976

The oxy-hydrogen flame is useful for welding and brazing aluminum alloys. Water welding is the misnomer given to an ... Combustion of Natural Gas and Propane Complete combustion of natural gas (methane) and propane is shown, ...


Aluminum Directory

Aluminum Welding with Propane torch Brazing Rod - YouTube
Alumaloy Alumaweld Alumarod Durafix Here is where you buy the Rods http://astore.amazon.com/sixtyfivefor... I'm using rod made by KT The brazing rod is ...

How to weld aluminum with a propane torch and low heat ...
This is a how to on fixing a leaking aluminium radiator with a propane torch and low heat aluminium welding rods which can be purchased from Harbor Freight

Dura Fix Aluminum Welding Aluminum Brazing Aluminum ...
Dura Fix Aluminum Welding Aluminum Brazing Aluminum Soldering & Repair Rods are not sold on Ebay US or Amazon

Aluminum Welding Rod | eBay
Find great deals on eBay for Aluminum Welding Rod in Mig Welding Rods and Wire. Shop with confidence.

Aluminum Welding Rods - Pack of 8 Low Temperature Rods
Aluminum welding rods cost less at Harbor Freight. Save big on this 8 pack of low temperature aluminum welding rods when you shop now.


ADVANCED PRODUCT FINDER

    Don't see what you're looking for?

Editor's picks

  • Bernzomatic Corp

    Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 700-750 Degrees, 2-Piece

    Home Improvement (Bernzomatic Corp)
    List Price: $4.89
    Price: $3.00
    You Save: $1.89 (39%)

    Brinnell hardness: 100
    Contains 12-Inch aluminum brazing/welding rods
    Working temp: 700-750 degrees


  • HFT

    Harbor Freight Tools Pack of 8 Alumiweld Aluminum Welding Rods

    Home Improvement (HFT)

    Minimize parent material distortion during welding
    No flux or fumes;
    Low working temperature (730° F)
    Excellent corrosion resistance


  • Forney

    Forney 46111 Easy Flo Brazing Rod, 1/8-Inch-by-18-Inch, 1/2-Pound

    Home Improvement (Forney)

    Rating (11 reviews):
    (4.4/5)
    Forney

    Worked very nice and easy

    0 5/5 Mark T. (Albany, OR USA) - See all my reviews Verified Purchase(What's this?) This review is from: Forney 46111 Easy Flo Brazing Rod, 1/8-Inch-by-18-Inch, 1/2-Pound (Tools & Home Improvement) Used these to braze together some perforated aluminum. Flowed nice at a low easy temperature. Was easy to work in more material as needed and smooth the edge as well. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , May 11, 2013

    Five Stars

    0 5/5 LINDA MICHELS (FLORIDA ,USA) - See all my reviews Verified Purchase(What's this?) This review is from: Forney 46111 Easy Flo Brazing Rod, 1/8-Inch-by-18-Inch, 1/2-Pound (Tools & Home Improvement) never used this before but it works great , i would suggest using some flux 0 Help other customers find the most helpful reviews  Was this review helpful to you? , October 8, 2014

    Works

    0 4/5 Taz (NJ USA) - See all my reviews Verified Purchase(What's this?) This review is from: Forney 46111 Easy Flo Brazing Rod, 1/8-Inch-by-18-Inch, 1/2-Pound (Tools & Home Improvement) It does work as described, however, it takes somewhat more heat that you might expect - definitely more than typical copper solder. I managed to melt one 1/4" aluminum rod I was trying to braze before I learned to control the heat (aluminum has no color change).The product is also only marginally self-fluxing, so I was really glad that I bought some aluminum flux along with it - without it, most of my joints failed. Once you get flux on the parts and get them properly heated, it sticks well and is ultimately stronger than the aluminum (more importantly, it is rather inflexible). Overall, very useful. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , March 22, 2013
    List Price: $9.11
    No flux is required
    Melting point is 732 degrees Fahrenheit (389 degrees Celsius)
    Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up
    Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings
    Includes aluminum magnesium


  • Alumaloy

    ALUMALOY 1 lb Pound: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint

    Home Improvement (Alumaloy)

    Tensile Strength 39,000 psi, compression strength 60,000 to 75,000 psi
    The benefit of Alumaloy is the 500 ° differential in melting temperature requirements
    ALUMALOY as seen on TV is an easy to use, fluxless & arcless aluminum repair rod. Alumaloy repairs are often stronger than the aluminum that is being repaired.
    Alumaloy melts at close to 728 ° F whereas aluminum melts at near 1220 ° F.
    Watch Alumaloy in action at www.youtube.com/watch?v=TZ5sD9 hQTyw


  • Alumaloy

    ALUMALOY 5 Rods: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint

    Single Detail Page Misc (Alumaloy)

    Watch Alumaloy in action at www.youtube.com/watch?v=TZ5sD9 hQTyw
    Alumaloy melts at close to 728 ° F whereas aluminum melts at near 1220 ° F.
    ALUMALOY as seen on TV is an easy to use, fluxless & arcless aluminum repair rod. Alumaloy repairs are often stronger than the aluminum that is being repaired.
    Tensile Strength 39,000 psi, compression strength 60,000 to 75,000 psi
    The benefit of Alumaloy is the 500 ° differential in melting temperature requirements


  • Bernzomatic Corp

    Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

    Home Improvement (Bernzomatic Corp)

    Rating (13 reviews):
    (4.4/5)
    Bernzomatic Corp

    Nickel-Silver Brazing rod

    0 5/5 Harvey Chao (Santa Clara, CA United States) - See all my reviews Verified Purchase(What's this?) This review is from: Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece (Tools & Home Improvement) Teamed with a MAP gas torch, a handy way for an occasional repair of small fab job by a handyman or home owner. Great for infrequent small jobs, but an expensive way to buy brazing rod. Much cheaper when purchased from a welding shop in 1 lb (or greater) quantities, but great for an infrequent need or small job. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , July 10, 2010

    Wonderful material brazes many materials

    Several years ago I was in a welding store looking over all the brazing rods. I had not seen these rods before and asked if they were worth their higher price. I was told that I could almost braze anything with these except aluminum. I have found that I can braze small plated parts and today I brazed some beaters (for a mixer) whose rivet had loosened and they were spinning on the shaft. This brazing material is nickel colored and looked nice on the beaters.You have to use a pretty hot mapp gas torch--my current favorite for brazing work is .This torch was barely hot enough for the beater repair -- it did the job and after a little wet and dry sand paper to take the slag off of the beaters and a little jeweler's rouge on a buffer to polish them, they looked very... 5/5 Wood worker and techy guy (San Francisco Bay Area, CA) - See all my reviews This review is from: Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece (Tools & Home Improvement) Several years ago I was in a welding store looking over all the brazing rods. I had not seen these rods before and asked if they were worth their higher price. I was told that I could almost braze anything with these except aluminum. I have found that I can braze small plated parts and today I brazed some beaters (for a mixer) whose rivet had loosened and they were spinning on the shaft. This brazing material is nickel colored and looked nice on the beaters.You have to use a pretty hot mapp gas torch--my current favorite for brazing work is Bernzomatic TS8000BT High Intensity Torch Head.This torch was barely hot enough for the beater repair -- it did the job and after a little wet and dry sand paper to take the slag off of the beaters and a little jeweler's rouge on a buffer to polish them, they looked very... Read more Help other customers find the most helpful reviews  Was this review helpful to you? , May 21, 2013

    Works well for cheap!

    0 4/5 arcanemotif - See all my reviews Verified Purchase(What's this?) This review is from: Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece (Tools & Home Improvement) Used this to braze 3/4" EMT tubing for a bike trailer frame together. Flows well even with the lower temperature setup I was using and bonded very well. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , August 27, 2013
    List Price: $4.89
    Price: $3.60
    You Save: $1.29 (26%)
    Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators
    Working temp: 1,680 degrees farenheit
    Contains 12-Inch rods
    Used in joining carbon and alloy steels as well as non-ferrous materials
    Tensile strength: 85,000 psi


  • Forney

    Forney 48302 Bare Brass Gas Brazing Rod, 3/32-Inch-by-36-Inch, 6-Rods

    Home Improvement (Forney)

    Rating (5 reviews):
    (4.8/5)
    Forney

    Just what I wanted!

    0 5/5 elkhunter - See all my reviews Verified Purchase(What's this?) This review is from: Forney 48302 Bare Brass Gas Brazing Rod, 3/32-Inch-by-36-Inch, 6-Rods (Tools & Home Improvement) What can you say about brazing rods? These are really good. I would buy these again. And will when I run out. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , June 28, 2013

    Used for Ornamental Twists

    0 5/5 K Beck (El Cajon, CA United States) - See all my reviews Verified Purchase(What's this?) This review is from: Forney 47302 Bare Brass Gas Brazing Rod, 1/8-Inch-by-36-Inch, 6-Rods (Tools & Home Improvement) Used them for ornamental purposes. Polished up great and were easy to aneal. I did not use them for brazing. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , December 9, 2013

    Exactly as described, and good quality too!

    0 5/5 Smoker "Smoker" (Texas) - See all my reviews Verified Purchase(What's this?) This review is from: Forney 48302 Bare Brass Gas Brazing Rod, 3/32-Inch-by-36-Inch, 6-Rods (Tools & Home Improvement) I purchased this to use as HAM radio antenna material. It matches the required specs, and arrived quickly. I'll have to get back to you about the actual results, as soon as I finish my antenna build. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , April 6, 2013
    List Price: $20.59
    Price: $16.99
    You Save: $3.60 (17%)
    Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings
    Melting point is 732-Degree Fahrenheit (389-Degree Celsius)
    No flux is required
    Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up
    Includes aluminum magnesium


  • Alumaloy

    ALUMALOY 10 Rods: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint

    Home Improvement (Alumaloy)

    Rating (4 reviews):
    (3.0/5)
    Alumaloy

    2 thumbs down if there was negative stars I would

    0 1/5 ted - See all my reviews Verified Purchase(What's this?) This review is from: ALUMALOY 10 Rods: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint (Misc.) Nope the stuff sucks bad, it has no strength at all i got it to bond to practice pieces and it cracked with no pressure at all ,the stuff doesn't work on cast aluminum either don't waste ur money or time with the shipping, paid for the fastest shopping and it still took days after when it was supposed to be here product 2 thumbs down 0 Help other customers find the most helpful reviews  Was this review helpful to you? , May 2, 2014

    Five Stars

    0 5/5 C. A. Gibbs "Fireman in NYC" (NYC, USA) - See all my reviews, September 6, 2014

    Doesn't work as advertised.

    0 1/5 Victor - See all my reviews This review is from: ALUMALOY 10 Rods: Aluminum REPAIR Rods No Welding Fix Cracks Drill Tap Polish or Paint (Misc.) Dis not work on cast aluminum despite bringing my workpiece to almost 1200°F.Waste of time and money. And the support from the manufacturer was nonexistent. 0 Help other customers find the most helpful reviews  Was this review helpful to you? , June 3, 2014
    ALUMALOY as seen on TV is an easy to use, fluxless & arcless aluminum repair rod. Alumaloy repairs are often stronger than the aluminum that is being repaired.
    The benefit of Alumaloy is the 500 ° differential in melting temperature requirements
    Watch Alumaloy in action at www.youtube.com/watch?v=TZ5sD9 hQTyw
    Tensile Strength 39,000 psi, compression strength 60,000 to 75,000 psi
    Alumaloy melts at close to 728 ° F whereas aluminum melts at near 1220 ° F.


  • Forney

    Forney 47300 Bare Brass Gas Brazing Rod, 1/8-Inch-by-18-Inch, 10-Rods

    Home Improvement (Forney)
    List Price: $41.22

    Includes aluminum magnesium
    Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up
    No flux is required
    Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings
    Melting point is 732 degrees Fahrenheit (389 degrees Celsius)


  • ToolsNMore

    Low Temperature Aluminum Welding Rods 8 Pc from TNM

    Home Improvement (ToolsNMore)


Aluminum